TDFZ 170229, TDFZ 170311 Vishay Draloric Pot Capacitors for Coupling Purposes TDFZ 170229 40 KVP TDFZ 170311 32 KVP o 120 (4.724 DIA) 311 4 (12.244 0.157) 5/16 - 18 UNC* Thread 229 4 (9.016 0.157) 5/16 - 18 UNC* Thread 100 (3.937) 2 (0.08) o 75 (2.953 DIA) 100 (3.937) o 75 (2.953 DIA) 2 (0.08) o 169 (6.654 DIA) o 169 (6.654 DIA) o 120 (4.724 DIA) 5/16 - 18 UNC* Thread 5/16 - 18 UNC* Thread 22 (0.866) o 65 (2.559 DIA) 22 (0.866) o 65 (2.559 DIA) * Dimensions in millimeters (inches) * Metric threads available on request MODEL: MATERIAL: The ceramic capacitor element is housed in a rugged silver plated copper can. This construction allows additional "Beltcontacting" of the outer electrode terminal over the copper can shaft. The results are short conduction paths with low impedance and low inductance as well as protection of the outer noble metal electrode. Capacitor elements made from Class 1 ceramic dielectric with noble metal electrodes. Connection terminals of the inner electrode and outer electrode's covering can made from copper/brass, silver plated. MARKING: Type designator, Capacitance value and tolerance, Rated voltage (peak value), Production date code, Ceramic material code, DRALORIC Logo, Serial number. FINISH: Insulating rim protected with silicone rubber. ORDERING INFORMATION TDFZ 170311 32 KVp 4000 pF 10 % R 85 MODEL RATED VOLTAGE CAPACITANCE VALUE TOLERANCE CERAMIC www.vishay.com 1 For technical questions contact: powcap@vishay.com Document Number: 22127 Revision: 24-Jan-02 TDFZ 170229, TDFZ 170311 Pot Capacitors for Coupling Purposes Vishay Draloric DERATING DIAGRAMS Ug [KVP] 35 TDFZ 170229 CERAMIC R 85 CAPACITANCE VALUE [pF] RATED VOLTAGE [KVP] RATED POWER [KVAr] RATED CURRENT [ARMS] 2000 40 120 max. 100 fu = 11.9 KHz Ug 200 200 120 100 100 20 10 50 50 1 10 10 0.5 5 5 1 f [MHz] 1 5 Qg Ig 0.2 0.1 0.001 Ug [KVP] 32 TDFZ 170311 CERAMIC R 85 CAPACITANCE VALUE [pF] RATED VOLTAGE [KVP] RATED POWER [KVAr] RATED CURRENT [ARMS] 3000 32 230 max. 120 fo = 6625 KHz Qg Ig [KVAr][ARMS] 0.01 0.1 fu = 24 KHz 1 2 5 fo = 3320 KHz Ug Ig 230 200 120 100 100 20 10 5 Qg [KVAr] [ARMS] Qg 1 0.5 50 50 10 10 5 5 1 1 Ig 0.1 0.001 TDFZ 170311 CERAMIC R 85 CAPACITANCE VALUE [pF] RATED VOLTAGE [KVP] RATED POWER [KVAr] RATED CURRENT [ARMS] 4000 32 230 max. 170 1 2 5 f [MHz] fo = 4995 KHz Qg Ig [KVAr] [ARMS] 10 230 200 170 100 100 5 50 50 1 10 10 0.5 5 5 1 f [MHz] 1 Qg 0.1 0.001 Document Number: 22127 Revision: 24-Jan-02 0.1 fu = 17.86 KHz Ug [KVP] 32 20 Ug CAPACITANCE TOLERANCE: 10 % Other capacitance values and tolerances are available on request. 0.01 Ig 0.01 For technical questions contact: powcap@vishay.com 0.1 1 2 5 www.vishay.com 2 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1