AGN200A24J - PANASONIC - Product.Shopping

GN (AGN)

ds_61007_en_gn: 280114D

ORDERING INFORMATION

High Sensitivity, with

100mW nominal operating

power, in a compact and

space saving case GN RELAYS

FEATURES

1. Compact slim body saves space.

Thanks to the small surface area of 5.7

mm  10.6 mm .224 inch  .417 inch

and low height of 9.0 mm .354 inch,

the packaging density can be

increased to allow for much smaller

designs.

2. High sensitivity single side stable

type (Nominal operating power:

100mW) is available.

3. Outstanding surge resistance

Surge breakdown voltage between

contacts and coil:

2,500 V 210 s (Telcordia)

Surge breakdown voltage between

open contacts:

1,500 V 10160 s (FCC part 68)

4. The use of twin crossbar contacts

ensures high contact reliability.

AgPd contact is used because of its

good sulfide resistance. Adopting low-

gas molding material. Coil assembly

molding technology which avoids

generating volatile gas from coil.

5. Increased packaging density

Due to highly efficient magnetic circuit

design, leakage flux is reduced and

changes in electrical characteristics

from components being mounted

close-together are minimized. This all

means a packaging density higher

than ever before.

6. Nominal operating power: 140 mW

7. Outstanding vibration and shock

resistance

Functional shock resistance: 750 m/s2

Destructive shock resistance:

1,000 m/s2

Functional vibration resistance:

10 to 55 Hz (at double amplitude of

3.3 mm .130 inch)

Destructive vibration resistance:

10 to 55 Hz (at double amplitude of

5 mm .197 inch)

8. Sealed construction allows

automatic washing.

9. Sealed according to RTIII (IP67)

TYPICAL APPLICATIONS

1. Telephone switchboard

2. Telecommunications equipment

3. Securits equipmeny

4. Test and measurement equipment

5. Electronic consumer and audio

visual equipment

Nominal coil voltage (DC)

1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V

12: 12V 24: 24V

Contact arrangement

2: 2 Form C

Type of operation

0: Standard type (B.B.M.)

AGN 2 0

Operating function

0: Single side stable

1: 1 coil latching

6: High sensitivity single side

stable type

Terminal shape

Nil:

Standard PC board terminal

Surface-mount terminal A type

Surface-mount terminal S type

Packing style

Nil:

Tube packing

Tape and reel packing (picked from 1/2/3/4 pin side)

Tape and reel packing (picked from 5/6/7/8 pin side)

GN (AGN)

2ds_61007_en_gn: 280114D

TYPES

1. Standard PC board terminal

Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.

2. Surface-mount terminal

1) Tube packing

: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S

Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.

2) Tape and reel packing

: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S

Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.

Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.

2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed.

RATING

1. Coil data

1) Single side stable type

2) 1 coil latching type

*Pulse drive (JIS C 5442-1996)

Nominal coil voltage Single side stable 1 coil latching High sensitivity single side stable

Part No. Part No. Part No.

1.5V DC AGN2001H AGN2101H AGN2601H

3V DC AGN20003 AGN21003 AGN26003

4.5V DC AGN2004H AGN2104H AGN2604H

6V DC AGN20006 AGN21006 AGN26006

9V DC AGN20009 AGN21009 AGN26009

12V DC AGN20012 AGN21012 AGN26012

24V DC AGN20024 AGN21024 AGN26024

Nominal coil voltage Single side stable 1 coil latching High sensitivity single side stable

Part No. Part No. Part No.

1.5V DC AGN2001H AGN2101H AGN2601H

3V DC AGN20003 AGN21003 AGN26003

4.5V DC AGN2004H AGN2104H AGN2604H

6V DC AGN20006 AGN21006 AGN26006

9V DC AGN20009 AGN21009 AGN26009

12V DC AGN20012 AGN21012 AGN26012

24V DC AGN20024 AGN21024 AGN26024

Nominal coil voltage Single side stable 1 coil latching High sensitivity single side stable

Part No. Part No. Part No.

1.5V DC AGN2001HZ AGN2101HZ AGN2601HZ

3V DC AGN20003Z AGN21003Z AGN26003Z

4.5V DC AGN2004HZ AGN2104HZ AGN2604HZ

6V DC AGN20006Z AGN21006Z AGN26006Z

9V DC AGN20009Z AGN21009Z AGN26009Z

12V DC AGN20012Z AGN21012Z AGN26012Z

24V DC AGN20024Z AGN21024Z AGN26024Z

Nominal coil

voltage Pick-up voltage

(at 20C 68F)Drop-out voltage

(at 20C 68F)

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)Nominal operating

power Max. applied voltage

(at 20C 68F)

1.5V DC

75%V or less of

nominal voltage*

(Initial)

10%V or more of

nominal voltage*

(Initial)

93.8mA 16

140mW 150%V of

nominal voltage

3V DC 46.7mA 64.2

4.5V DC 31mA 145

6V DC 23.3mA 257

9V DC 15.5mA 579

12V DC 11.7mA 1,028

24V DC 9.6mA 2,504230mW 120%V of

nominal voltage

Nominal coil

voltage Set voltage

(at 20C 68F)Reset voltage

(at 20C 68F)

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)Nominal operating

power Max. applied voltage

(at 20C 68F)

1.5V DC

75%V or less of

nominal voltage*

(Initial)

75%V or less of

nominal voltage*

(Initial)

66.7mA 22.5

100mW 150%V of

nominal voltage

3V DC 33.3mA 90

4.5V DC 22.2mA 202.5

6V DC 16.7mA 360

9V DC 11.1mA 810

12V DC 8.3mA 1,440

24V DC 5.0mA 4,800120mW

GN (AGN)

ds_61007_en_gn: 280114D

3) High sensitivity single side stable type

*Pulse drive (JIS C 5442-1996)

2. Specifications

Notes:

This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.

*2 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.

REFERENCE DATA

Nominal coil

voltage Set voltage

(at 20C 68F)Reset voltage

(at 20C 68F)

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)Nominal operating

power Max. applied voltage

(at 20C 68F)

1.5V DC

80%V or less of

nominal voltage*

(Initial)

10%V or more of

nominal voltage*

(Initial)

66.7mA 22.5

100mW 150%V of

nominal voltage

3V DC 33.3mA 90

4.5V DC 22.2mA 202.5

6V DC 16.7mA 360

9V DC 11.1mA 810

12V DC 8.3mA 1,440

24V DC 5.0mA 4,800120mW 120%V of

nominal voltage

Characteristics Item Specifications

Contact Arrangement 2 Form C

Initial contact resistance, max. Max. 100 m (By voltage drop 6 V DC 1A)

Contact material Stationary contact: AgPd+Au clad Movable contact: AgPd

Rating

Nominal switching capacity 1 A 30 V DC, 0.3 A 125 V AC (resistive load)

Max. switching power 30 W (DC), 37.5 V A (AC) (resistive load)

Max. switching voltage 110 V DC, 125 V AC

Max. switching current 1 A

Min. switching capacity (Reference value)*110A 10 mV DC

Nominal operating

power

Single side stable 140mW (1.5 to 12 V DC), 230mW (24 V DC)

High sensitivity single side

stable type 100mW (1.5 to 12 V DC), 120mW (24 V DC)

1 coil latching

Electrical

characteristics

Insulation resistance (Initial) Min. 1,000M (at 500V DC)

Measurement at same location as “Initial breakdown voltage” section.

Breakdown voltage

(Initial)

Between open contacts 750 Vrms for 1min. (Detection current: 10mA)

Between contact and coil 1,500 Vrms for 1min. (Detection current: 10mA)

Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA)

Surge breakdown

voltage (Initial) Between open contacts 1,500 V (10160s) (FCC Part 68)

Between contacts and coil 2,500 V (210s) (Telcordia)

Temperature rise (at 20C 68F)Max. 50C

(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)

Operate time [Set time] (at 20C 68F)

Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)

Release time [Reset time] (at 20C 68F)Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce

time.) (without diode)

Mechanical

characteristics

Shock resistance Functional Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.)

Destructive Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)

Vibration resistance Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)

Destructive 10 to 55 Hz at double amplitude of 5 mm

Expected life Mechanical Min. 5  107 (at 180 times/min.)

Electrical Min. 105 (1 A 30 V DC resistive), 105 (0.3 A 125 V AC resistive) (at 20 times/min.)

Conditions Conditions for operation, transport and storage*2

Ambient temperature:

(Single side stable, 1 coil latching type) –40C to +85C –40F to +185F

(High sensitivity single side stable type) –40C to +70C –40F to +158F

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

Max. operating speed (at rated load) 20 times/min.

Unit weight Approx. 1 g .035 oz

1. Max. switching capacity 2. Life curve 3. Mechanical life

Tested sample: AGN2004H, 15 pcs.;

Operating speed: 180 times/min

30 100

Contact voltage, V

1.0

0.3

DC resistive load

AC resistive load

Switching current, A

No. of operations, × 104

0.2 0.4 0.6 0.8 1.0 1.2

100

DC 30V resistive load

AC 125V

resistive load

3.5

2.5

1.5

0.5

100

Max.

Min.

30 50

Max.

Min.

Pick-up voltage

Drop-out voltage

No. of operations, ×104

Voltage, V

GN (AGN)

4ds_61007_en_gn: 280114D

DIMENSIONS (mm inch))

4. Electrical life (1A 30V DC resistive load)

Tested sample: AGN2004H, 6 pcs.

Operating speed: 20 cpm

Change of pick-up and drop-out voltage Change of contact resistance

5. Coil temperature rise

Tested sample: AGN2004H, AGN20024, 6 pcs.

Point measured: Inside the coil

Ambient temperature: Room temperature

Max.

Min.

100

0510

Pick-up voltage

Drop-out voltage

No. of operations, ×104

Ratio against the rated voltage, %V

100

0105

N.O. contact

N.C. contact

No. of operations, ×104

Contact resistance, mΩ

100 110 120 130 140 150

24V DC type

4.5V DC type

1 A

0 A

Coil applied voltage, %

Temperature rise, °C

6-(1). Operate and release time (without diode)

Tested sample: AGN2004H, 6 pcs. 6-(2). Operate and release time (with diode)

Tested sample: AGN2004H, 6 pcs. 7. Ambient temperature characteristics

Tested sample: AGN2004H, 6 pcs.

80 90 100 110 120

2.5

1.5

0.5

Max.

Min.

Release time

Operate time

Coil applied voltage, %V

Operate and release time, ms

80 90 100 110 120

2.5

1.5

0.5

Max.

Min.

Max.

Min.

Coil applied voltage, %V

Operate and release time, ms

Release time

Operate time

60 80 10040

-40 -20 0

-50

-40

-30

-20

-10Ambient temperature, °C

Rate of change, %V

Drop-out

voltage

Pick-up

voltage

8. Malfunctional shock

Tested sample: AGN2004H 9-(1). Influence of adjacent mounting

Tested sample: AGN20012, 6 pcs. 9-(2). Influence of adjacent mounting

Tested sample: AGN20012, 6 pcs.

Z' X'

ZXX' Deenergized condition

Energized condition

1,000m/s2

068101224

-5

-10

-5

OFF OFF

OFF

Drop-out voltage

Pick-up voltage

.236 .315 .394 .472.079 .157

Inter-relay distance , mm inch

Rate of change, %V Rate of change, %V

024681012

.079 .157 .236 .315 .394 .472

-10

-5

Drop-out voltage

Pick-up voltage

OFF

Inter-relay distance , mm inch

Rate of change, %V Rate of change, %

Download from our Web site.

CAD Data

1. PC board terminal

CAD Data External dimensions

Standard type

10.60±0.3 5.70±0.3

0.40±0.1

(1.50)

2.20±0.15

3.20±0.15

0.25±0.1

3.20±0.15

3.50±0.3

(0.50)

9.00±0.3

.417±.012 .224±.012

.016±.004

(.059)

.087±.006

.126±.006

.010±.004

.126±.006

.138±.012

(.020)

.354±.012

PC board pattern

Tolerance: 0.1 .004

3.20

2.20

7.60

3.20

0.85 dia.

.126

.087

.299

.126

.033 dia.

Schematic (Bottom view)

Single side stable

High sensitivity

single side stable

(Deenergized condition)

1 coil latching

(Reset condition)

Direction indication

8765

1234

Direction indication

GN (AGN)

ds_61007_en_gn: 280114D

2. Surface-mount terminal

Schematic (Top view)

NOTES

For Cautions for Use, see Relay Technical Information.

Type External dimensions Suggested mounting pad (Tolerance: 0.1 .004)

Single side stable/1 coil latching/High sensitivity single side stable Single side stable/1 coil latching/High sensitivity single side stable

A type

S type

CAD Data

10.60±0.3 5.70±0.3

0.40±0.1

(1.50)

3.20±0.15

0.25±0.1

2.20±0.15

7.40±0.3

(0.50)

9.00±0.3 Max. 10.00

.417±.012 .224±.012

.016±.004

(.059)

.126±.006

.010±.004

.087±.006

.291±.012

(.020)

.354±.012 .394

2.20

3.20

5.30

3.10

0.80

.087

.126

.209

.122

.031

10.60±0.3 5.70±0.3

3.20±0.15

0.40±0.1

(1.50)

0.25±0.1

3.20±0.15

2.20±0.15

5.70±0.3

(0.50)

9.00±0.3 Max. 10.00

.417±.012 .224±.012

.126±.006

.016±.004

(.059)

.010±.004

.126±.006

.087±.006

.224±.012

(.020)

.354±.012 .394

2.20

3.20

4.45

2.25

0.80

.087

.126

.175

.089

.031

Single side stable

High sensitivity single side stable

(Deenergized condition)

1 coil latching

(Reset condition)

Direction indication

1 234

8 765

Direction indication

5678

2134

1. Packing style

1) The relay is packed in a tube with the

relay orientation mark on the left side, as

shown in the figure below.

2) Tape and reel packing

(A type)

(1)-1 Tape dimensions mm inch

(S type)

(1)-2 Tape dimensions

(2) Dimensions of plastic peel mm inch

2. Automatic insertion

To maintain the internal function of the

relay, the chucking pressure should not

exceed the values below.

Chucking pressure in the direction A:

4.9 N {500gf} or less

Chucking pressure in the direction B:

9.8 N {1 kgf} or less

Chucking pressure in the direction C:

9.8 N {1 kgf} or less

Please chuck the portion.

Avoid chucking the center of the relay.

In addition, excessive chucking pressure

to the pinpoint of the relay should be

avoided.

Orientation (indicates PIN No.1)stripe

Stopper (green) Stopper (red)

Relay polarity bar

(Z type)

Tape coming out direction

General tolerance ±0.1 mm .004 inch

4.00

1.75

0.40

10.70±0.2

2.00

2.00 dia.

GN relays 16.00 8.00

11.50

24.00±0.3

11.10

1.50+0.1

0 dia.

.059+.004

0 dia.

.157

.069

.016

.421±.008

.079

.079 dia.

.630 .315

.453

.945±.012

.437

Relay polarity bar

(Z type)

Tape coming out direction

General tolerance ±0.1 mm .004 inch

1.50+0.1

0 dia.

.059+.004

0 dia.

2.0 dia.

4.00

1.75

10.70±0.2

0.40

2.00

GN relays 16.00 6.3

11.50

11.10

24.00±0.3

.079 dia.

.157

.069

.421±.008

.016

.079

.630 .248

.453

.437

.945±.012

2.0

.079

13 dia.

.512 dia.

21 dia.

.827 dia. 80 dia.

3.150 dia.

380 dia.

14.961 dia.

ACB